The  Utilization and Extraction Method of Nanocellulose: A Review

Farrah Fadhillah Hanum; Aster Rahayu; Nafira Alfi Zaini Amrillah; Yoga Nawaki Helmi Mustafa

doi:10.31938/jsn.v13i3.565

The Utilization and Extraction Method of Nanocellulose: A Review

Authors

Farrah Fadhillah Hanum Universitas Ahmad Dahlan
Aster Rahayu Universitas Ahmad Dahlan
Nafira Alfi Zaini Amrillah Universitas Ahmad Dahlan
Yoga Nawaki Helmi Mustafa Universitas Ahmad Dahlan

DOI:

https://doi.org/10.31938/jsn.v13i3.565

Keywords:

Nanocellulose, Utilization, Methods, Preparation, Extraction

Abstract

Currently, the use of nanocellulose is very broad in various fields, such as pharmaceuticals, cosmetics, and electronics industries. In its development, this nano-sized cellulose is widely used as a reinforcement nanocomposite nanofiller. Nanocellulose has several advantages, including its large surface area, very lightweight, easy to shape, ability to break through the performance limits of conventional materials, and having a high economic value. Nanotechnology develops based on new properties produced by nanomaterials as advanced materials. Therefore, the factor of the extraction process method must be considered to produce nanocellulose that has good quality and large quantity. Nanocellulose extraction can be accomplished in a variety of ways depending on the raw material but is generally done through a combination of chemical, mechanical, and biological treatments.

Downloads

Download data is not yet available.

References

Ago, M., Jakes, J. E., Johansson, L. S., Park, S., & Rojas, O. J. (2012). Interfacial properties of lignin-based electrospun nanofibers and films reinforced with cellulose nanocrystals. ACS Applied Materials and Interfaces, 4(12), 6849–6856. https://doi.org/10.1021/am302008p

Amrillah, Z., Hanum, F. F., & Rahayu, A. (2022). Studi Efektivitas Metode Ekstraksi Selulosa dari Agricultural Waste. Seminar Nasional Penelitian LPPM UMJ, 8. http://jurnal.umj.ac.id/index.php/semnaslit%0AE-ISSN:2745-6080

Besbes, I., Alila, S., & Boufi, S. (2011). Nanofibrillated cellulose from TEMPO-oxidized eucalyptus fibres: Effect of the carboxyl content. Carbohydrate Polymers, 84(3), 975–983. https://doi.org/10.1016/j.carbpol.2010.12.052

Dufresne, A. (2017). Cellulose nanomaterial reinforced polymer nanocomposites. Current Opinion in Colloid and Interface Science, 29, 1–8. https://doi.org/10.1016/j.cocis.2017.01.004

Effendi, D. B., Rosyid, N. H. R., Nandiyanto, A. B. D., & Mudzakir, A. (2015). Review : Sintesis Nanoselulosa. Jurnal Integrasi Proses, 5(2), 61–74.

Fonseca, D. F. S., Carvalho, J. P. F., Bastos, V., Oliveira, H., Moreirinha, C., Almeida, A., Silvestre, A. J. D., Vilela, C., & Freire, C. S. R. (2020). Antibacterial multi-layered nanocellulose-based patches loaded with dexpanthenol for wound healing applications. Nanomaterials, 10(12), 1–16. https://doi.org/10.3390/nano10122469

Guniawaty, Y., Sardjono, R. E., Khoerunnisa, F., & Anonim. (2021). Chemica Isola Aplikasi Enkapsulasi Selulosa Nanopartikel pada Nanomedicine. 1(2), 58–64.

Handayani, N. (2021). Nanokomposit Ramah Lingkungan Melalui Isolasi Nanofibril Selulosa (Nfs) Dari Tandan Kosong Sawit Dan Poly Lactid Acid (Pla) Sebagai Matrik. Jurnal Sains Dan Teknologi Reaksi, 18(02). https://doi.org/10.30811/jstr.v18i02.2254

Hidayatulloh, I., Widyanti, E. M., Kusumawati, E., & Elizabeth, L. (2021). Nanocellulose production from empty palm oil fruit bunches (Epofb) using hydrolysis followed by freeze drying. ASEAN Journal of Chemical Engineering, 21(1), 52–61. https://doi.org/10.22146/ajche.61093

Jonasson, S., Bünder, A., Berglund, L., Hertzberg, M., Niittylä, T., & Oksman, K. (2021). The Effect of High Lignin Content on Oxidative Nanofibrillation of Wood Cell Wall. 1–13.

Joshi, P. V, Mandot, A. A., & Patel, B. H. (2018). Enzymatic Extraction of Nano Cellulose from Banana Stem: Morphological, Structural and Thermal Characterization. J. Nat. Prod. Plant Resour, 8(1), 1–11.

Julianto, H., Farid, M., & Rasyida, A. (2017). Ekstraksi Nanoselulosa dengan Metode Hidrolisis Asam sebagai Penguat Komposit Absorpsi Suara. Jurnal Teknik ITS, 6(2), 242–245. https://doi.org/10.12962/j23373539.v6i2.24259

Lavoine, N., Desloges, I., Dufresne, A., & Bras, J. (2012). Microfibrillated cellulose - Its barrier properties and applications in cellulosic materials: A review. Carbohydrate Polymers, 90(2), 735–764. https://doi.org/10.1016/j.carbpol.2012.05.026

Levani?, J., Šenk, V. P., Nadrah, P., Poljanšek, I., Oven, P., & Haapala, A. (2020). Analyzing TEMPO-Oxidized Cellulose Fiber Morphology: New Insights into Optimization of the Oxidation Process and Nanocellulose Dispersion Quality. ACS Sustainable Chemistry and Engineering, 8(48), 17752–17762. https://doi.org/10.1021/acssuschemeng.0c05989

Liu, J., Korpinen, R., Mikkonen, K. S., Willför, S., & Xu, C. (2014). Nanofibrillated cellulose originated from birch sawdust after sequential extractions: A promising polymeric material from waste to films. Cellulose, 21(4). https://doi.org/10.1007/s10570-014-0321-4

Lynd, L. R., Weimer, P. J., Zyl, W. H. Van, & Isak, S. (2002). Microbial Cellulose Utilization : Fundamentals and Biotechnology Microbial Cellulose Utilization : Fundamentals and Biotechnology Downloaded from http://mmbr.asm.org/ on February 6 , 2013 by INDIAN INSTITUTE OF TECHNOLOGY MADRAS. Microbiology and Molecular Biology Reviews, 66(3), 506–577. https://doi.org/10.1128/MMBR.66.3.506

Maghfirah, A., Fahma, F., Lisdayana, N., Yunus, M., Kusumaatmaja, A., & Kadja, G. T. M. (2022). On the Mechanical and Thermal Properties of Poly(Vinyl Alcohol) – Alginate Composite Yarn Reinforced with Nanocellulose from Oil Palm Empty Fruit Bunches. Indonesian Journal of Chemistry, 22(1), 114–125. https://doi.org/10.22146/ijc.67881

Moniruzzaman, M., & Ono, T. (2013). Separation and characterization of cellulose fibers from cypress wood treated with ionic liquid prior to laccase treatment. Bioresource Technology, 127, 132–137. https://doi.org/10.1016/j.biortech.2012.09.113

Ningtyas, K. R., Muslihudin, M., Sari, I. N., Produk, P., Politeknik, A. /, Lampung, N., Studi, P., Pangan, T., & Politeknik, /. (2020). Synthesis of nanoselulosa from agricultural waste using variation acid concentration. Jurnal Penelitian Pertanian Terapan, 20(2), 142–147. http://www.jurnal.polinela.ac.id/JPPTeISSN2047-1781

Pönni, R., Pääkkönen, T., Nuopponen, M., Pere, J., & Vuorinen, T. (2014). Alkali treatment of birch kraft pulp to enhance its TEMPO catalyzed oxidation with hypochlorite. Cellulose, 21(4), 2859–2869. https://doi.org/10.1007/s10570-014-0278-3

Rahayu, A., Hanum, F. F., Amrillah, N. A. Z., Lim, L. W., & Salamah, S. (2022). Cellulose Extraction from Coconut Coir with Alkaline Delignification Process. Journal of Fibers and Polymer Composites, 1(2), 106–116. https://doi.org/10.55043/jfpc.v1i2.51

Rezty Hertiwi, L., Afni, A. N., Lailiyah, N., & Sanjaya, G. M. (2020). Ekstraksi dan karakterisasi nanoselulosa dari limbah kulit bawang merah. Journal Education and Chemistry, 2(1), 77–81.

Riyadi, W., Purwasasmita, B., & Imam, D. (2020). Penambahan nanoselulosa sekam padi terhadap kekuatan fleksural basis gigi tiruan resin akrilik polimerisasi panas. Journal of Dentistry, 4(2), 336–342.

Rohmawati, U., Rimasani, A., Pamungkas, A. J. I., & Fillaeli, A. (2020). Optimalisasi Filtrasi Masker Kain Dengan Filter Cartridge Dari Limbah Sabut Kelapa Untuk Mewujudkan Sustainable Development Goals 2030. Jurnal UIN Alauddin, 2(September), 441–448.

Sena, P. W., Ganda Putra, G. P., & Suhendra, L. (2021). Characterization of Cellulose from Cocoa Pod Husk (Theobroma cacao L.) on various concentration of Hydrogen Peroxide and Bleaching Temperature. 9(3), 288–299.

Septevani, A. A., Burhani, D., Sampora, Y., Devy, Y. A., Ariani, G. N., Sudirman, S., Sondari, D., & Mohd Amin, K. N. (2019). The Effect of Acid Hydrolysis Treatment on the Production of Nanocellulose Based on Oil Palm Empty Fruit Bunches. Jurnal Kimia Terapan Indonesia, 21(1), 31–37. https://doi.org/10.14203/jkti.v21i1.416

Sijabat, E. K., Avelina, Y. N., & Permatasari, A. (2017). Sijabat 2017. 9(2), 21–29.

Sunardi, S., Firda Trianda, N., & Irawati, U. (2020). Pengaruh Nanoselulosa dari Pelepah Nipah sebagai Filler terhadap Sifat Bioplastik Polivinil Alkohol. Justek : Jurnal Sains Dan Teknologi, 3(2), 69. https://doi.org/10.31764/justek.v3i2.3704

Suopajärvi, T., Ricci, P., Karvonen, V., Ottolina, G., & Liimatainen, H. (2020). Acidic and alkaline deep eutectic solvents in delignification and nanofibrillation of corn stalk, wheat straw, and rapeseed stem residues. Industrial Crops and Products, 145(October 2019), 111956. https://doi.org/10.1016/j.indcrop.2019.111956

Taokaew, S., Seetabhawang, S., Siripong, P., & Phisalaphong, M. (2013). Biosynthesis and characterization of nanocellulose-gelatin films. Materials, 6(3), 782–794. https://doi.org/10.3390/ma6030782

Trache, D., Tarchoun, A. F., Derradji, M., & Hamidon, T. S. (2020). Nanocellulose : From Fundamentals to Advanced Applications (Vol. 8, Issue May). https://doi.org/10.3389/fchem.2020.00392

Wicaksono, R., Wibowo, C., & Fajar, R. (2020). Bioplastik Tapioka Dengan Penambahan Sorbitol. Prosiding Seminar Nasional Dan Call for Papers, 18–28.

Widiastuti, E., & Marlina, A. (2020). Optimasi Pembuatan Nanoselulosa dari Rumput Alang-Alang. Fluida, 13(2), 59–64. https://doi.org/10.35313/fluida.v13i2.2249

Xue, Y., Qi, L., Lin, Z., Yang, G., & He, M. (2021). High-Strength Regenerated Cellulose Fiber Reinforced with Cellulose Nanofibril and Nanosilica.

Yudianti, Rike. (2022). Pengembangan Nanokomposit Berbasis Nanoselulosa dan Nanokarbon sebagai Material Fungsional. In Pengembangan Nanokomposit Berbasis Nanoselulosa dan Nanokarbon sebagai Material Fungsional. https://doi.org/10.55981/brin.431

Zhou, Z., Li, Y., & Zhou, W. (2021). The progress of nanocellulose in types and preparation methods. Journal of Physics: Conference Series, 2021(1). https://doi.org/10.1088/1742-6596/2021/1/012042

Zhu, Q., Zhou, R., Liu, J., & Sun, J. (2021). Recent Progress on the Characterization of Cellulose Nanomaterials by Nanoscale Infrared Spectroscopy. 1–18.